Metal Support System for External Panel Cladding from StoneClip

By StoneClip

Got a Question about this product?

Metal Support System for both Commercial and Domestic Fields

Uni-Strut StoneClip Metal Support System

Metal Support System
By using the Uni-Strut StoneClip 62mm x 41mm, 41mm x 41mm or 41mm x 21mm Metal Support System you can effect a cavity from 51mm to 165mm (x 2.5 mm wall thickness channel to be used) on any substrate that is being clad with any type of panel cladding.

In doing so you can eliminate the need to install Shelf Angles at each floor level, as the dead load is being supported by the individual StoneClips.

Recent Projects Internationally by StoneClip

Australia and India
Pakistan and Bangladesh
Sri Lanka and Nepal
United Arab Emirates and Oman
Qatar and Bahrain
Kuwait and Saudi Arabia

Features of StoneClip's Metal Support System
Load limits on the Uni-Strut StoneClip should be kept to 45kgs/12mm clip at 75mm unsupported cavity per clip, up to 55kgs/16mm clip at 90mm unsupported cavity.

This gives you a maximum cavity of up to 150mm with the 12mm StoneClip up to a maximum of 175mm for the 16mm StoneClip. These widths are when using the 62mm deep channel.

The Uni-Strut come in two sizes, 12mm and 16mm and are 150mm long with their own channel nuts, base plates and two lock nuts. The cavities are all allowing for an unsupported length of thread of 75mm on the 12mm StoneClips and 90mm on the 16mm StoneClips.

Advantages of the Uni-Strut Metal Support System

Working with an approved vertical support system
Allows fixing to solid parts of the substrate if slotted channel is used
Utilises the unique StoneClip mechanical fixing head
Works well with substrates that are not in Plumb
No epoxy needed to fix your cladding panels to substrate only needed to effect the width of the joint between the panel courses
Allows greater productivity with the system as when you have one panel fixed you are immediately ready to fix the one above

Got a question about this product

More information about this product

Contact Details

Contact StoneClip

By sending this enquiry you will also be informed of other related opportunities.

* First Name

Surname

Phone

* Your Email

State

Message

Be the first to know about new products, services and developments. Send me Infolink's newsletter.

Get new security code

* does not match

Send Enquiry

News sign up

StoneClip News

Eco-Stoneclip for securing stone panels available from Stoneclip (27/05/2009)

The new, Pat Rafter Arena, tennis centre in Brisbane is clad in North Qld Basult. The Basult pieces are all secured into place with cement based adhesive and 1 only 20mm size. Stoneclip with 1 fixing/

New Instructional Video from StoneClip (25/05/2009)

StoneClip recently produced a video demonstrating how to install stone panels using the StoneClip mechanical fixing system.

High capacity 16mm adjustable clips from StoneClip (17/02/2009)

StoneClip supply adjustable Stone clips from the 6mm x 50mm long shaft, which can carry loads of 7.8kg/clip at 50mm cavity, right up to over 180kg/clip at 50mm with the 16mm version which has a 100mm

Stoneclip used for columns in Brisbane high rise

Stoneclip used for columns in inner Brisbane highrise (6/02/2009)

The columns are clad in 1200mm x 600mm x 20mm thick marble and they are now going to add mechanical fixing to the last course of stone.

RSS Feed

News sign up |

View All 23 StoneClip News

Sections

Infolink Newsletter

Be the first to know about new products, services and developments. Sign up for Infolink Product News.