Expansion Joints, Polyethylene Rod and Closed Cell Foam by Sekisui Pilon
Softlon F-Series Lightweight Foam to isolate vibration and reduce structural noise
Sof-Form Pipe is a expansion joint sleeves for PVC pipes
Easy-Form Self Wound Expansion Joints Fillers
Sof-Form Expansion Joint Fillers with continuous rolls
Easy-Form, Lightlon, Sof-Form, Softlon Building and Construction Products
Industry leading construction and building solutions, Sekisui Pilon provides an extensive range of expansion joints and foams for sealants and fillers.
Eliminating time and fuss using Easy-Form Expansion Joints with Paperless Adhesive Back
Easy-Form Self Wound Expansion Joint Fillers do not create any mess with the paperless back and are closed cell to ensure no liquid absorption.
Lightlon Backer Rod is a closed cell polyethylene rod coming in profiles from 6mm to 50mm in various roll lengths and 2 metre rods.
The closed cell design ensures these joint fillers do not absorb most liquids.
Sof-Form Pipe is closed cell foam, designed for rebar applications and to go over PVC pipes when being submerged into concrete.
F5, F10 and F25 is a range of specialised lightweight foam coming in various densities and thickness.
Eliminating time and fuss using Easy-Form Expansion Joints with Paperless Adhesive Back
Easy-Form Self Wound Expansion Joint Fillers do not create any mess with the paperless back and are closed cell to ensure no liquid absorption.
- Designed for excellent compression and recovery for a good joint filler
- Simple to install, just position foam at start point, unroll and give pressure for adherence
- Increased productivity with less labour time involved for installation
- Transporting and storing is easy
- No release liner
- Lamminations and join free in this one piece extruded foam
- Available in 50mm to 300mm wide profiles x 10mm thick x 25 metre rolls
Lightlon Backer Rod is a closed cell polyethylene rod coming in profiles from 6mm to 50mm in various roll lengths and 2 metre rods.
- CFC free
- Chemical resistance to most chemicals
- Does not produce any toxins or odours
- No adhesion to sealants
- Rot resistant
- Available in 6mm to 30mm diameter profiles in various lengths as well as in 40mm and 50mm in 2metre rods
- Suitable to fill voids in concrete works, and is used with sealants
The closed cell design ensures these joint fillers do not absorb most liquids.
- Continuous rolls with no laminations or joins
- Cross linked to withstand weather conditions and resist UV light
- Sof-form provides an expansion and contraction buffer
- Used in the construction of concrete slabs, footpaths, road work, bridges, tunnels and walls
- Sof-Form Plain Expansion Joint – 50mm to 300mm wide profiles x 10mm thick x 25metre rolls
- Sof-Form Adhesive Back Expansion Joint – 50mm to 300mm profiles x 10mm thick x 25 metre rolls
Sof-Form Pipe is closed cell foam, designed for rebar applications and to go over PVC pipes when being submerged into concrete.
- Suitable for 60mm, 90mm and 100mm pipes
- Effortless to install
- Available in lengths from 2m to 100m
F5, F10 and F25 is a range of specialised lightweight foam coming in various densities and thickness.
- Closed Cell Foam that is non toxic and environmentally friendly
- Thermal insulation with a temperature resistance of between -80ºC and 80 ºC
- Chemical and weather resistance with low water vapour transmission
- Used in Motorway Bridges, Reservoirs, Sewerage and Digestion Tanks, Multi-story Hotels and Apartments, Concept Halls, Cinemas and Swimming Pools
Related Sekisui Pilon News
Sekisui Pilon releases Easy-Form self wound expansion joint fillers
11.10.2012 - Sekisui Pilon has released Easy-Form self wound expansion joint fillers.Thanks to a paperless adhesive back these expansion joint fillers are mess fre
Easy-Form expansion joint fillers from Sekisui Pilon
07.09.2012 - Sekisui Pilon presents the Easy-Form self-wound expansion joint fillers with paperless adhesive back.Easy-Form expansion joint fillers eliminate
Thermobreak thermal insulation from Sekisui Pilon
23.03.2011 - Thermobreak thermal insulation from Sekisui Pilon is cost effective and easy and quick to install. It is non fibrous and prevents the growth of
Foam products from Sekisui Pilon
10.01.2008 - Sekisui Pilon manufactures various types of foams with a number of industrial applications. Softlon and Evalon, are physically
Related Sekisui Pilon Showcases
High performance closed cell physically crosslinked polyolefin ...
Innovative Thermobreak is leading flexible thermal insulation ...
Contact Sekisui Pilon
1-5 Parraweena Road
Taren Point
NSW 4105
Fax: 02 9525 8004
