Vertic FRP/Aluminium Grating, Handrails and Access Systems from Safemaster Height Safety Solutions

• All fittings included to install walkway with handrail on one side or both
• Metal/deck roof with 0-5° roof pitch.
• High resistance to slip
• Lightweight
• Maintenance free non-corrosive aluminium
• Simply installed to all metal deck roof sheeting
• Available in 6m lengths
• Please enquire about other pitches

FRP Walkways

• All fittings included to install walkway
• Available in 3.6m lengths
• Quick and easy - lay up to 200 metres per day!

Moulded Grating Advantages

• Moulded grating is made by manually laying the fibreglass strands BiDirectional. Once the desired thickness is met the resin is then added.
• Because the grating is “cast” in one piece, there is no mechanical joint between bearing bars, unlike the pultruded grating where the glued joints can give way in heavy continuous traffic or after prolonged service.
• The high percentage of resin (65%) in moulded grating offers superior corrosion resistance.
• The moulded grating with a square mesh pattern offers increased load capacity and panel utilization due to this bi-directional trait.
• Cuffing access holes in the molded grating does not weaken the panel and does not require additional or costly supports.
• Safemaster moulded grating is engineered to meet the requirements of Australian Standard AS 1657-1992.
• Premium grade vinyl ester resin offers superior resistance to corrosion over a broad range of chemicals coupled with elevated temperatures.
• Both types of resin systems come standard with U.V. inhibitors and fire retardants, conforming to class 1 flame spread rating of less than 10, when tested to the Tunnel Test requirements of ASTM