Building Construction Designers’ Software by Pryda

By Pryda Australia

Got a Question about this product?

Enquire Now

Visit Website

Building Construction Designer Solutions Software

Other Products from Pryda Australia

Lintels for Timber Wall Frames from Pryda

Timber Floor and Rafter Trusses by Pryda

Pryda Designer Solutions Software: Design software for timber floors, rafters, structural beams, wall frames, framing, bracing and building products

The Pryda Designers Solutions CD
The Pryda Designers Solutions CD is an innovative problem-solving piece of software to design and estimate. These programs are supplied to building designers, engineers and builders free of charge.

The program on this new CD has an automatic update facility
It will automatically check for updates to be downloaded each time you use the program
This will ensure that your software always remains current.

This software contains the following design programs:

Floor and Rafter Trusses

Truss Systems Designer: The only software available for designers and builders to design floor and rafter trusses. Designs residential and commercial floors with selected dynamic performance levels, plus concentrated loads from walls, tiled areas, spas, etc. Roof rafters and purlins designed for a full range of wind speeds and roof materials. The software is user friendly and intuitive, and includes a cost comparison analysis for selection of the most cost effective specification for each truss application.
Truss End Support Types
Truss Fixing Requirements

Timber Framing Design

Pryda Frame: Designs virtually any structural timber component and calculates the most cost effective sizes of structural beams, joists, roof members, wall plates and studs.
Pryda Brace (bracing design): A tool created by Pryda Australia to simplify the design of wall bracing for residential and similar timber framed buildings. Based on AS1684, it computes the design capacities of bracing systems comprised of bracing units of any available type and suitable length and compares these capacities to AS1684 wind racking forces. Optionally, it can also be used to determine the design racking forces on single or multi-section buildings of a range of plan shapes. The output summarises input data and provides a list of bracing units with design tie-down and shear forces. Designs can be saved as jobs.

Pryda Timber Connectors

Timber Connectors Catalogue: A comprehensive catalogue for all Pryda timber connecting product with search facility, size ranges, technical specifications and more.
Product Design Guides
Complete guides to the design, specification and installation of Pryda timber connector products.

Musclebeam Structural

Beams Span Tables

Easily order online at the Pryda website using the link below.

Got a question about this product

More information about this product

Contact Details

More Products By Pryda Australia

Lintels for Timber Wall Frames from Pryda

The Pryda Lintel is an engineered steel 'L' section that is fastened to the prefabricated wall frame at the truss plant and delivered to site in a neat stack. The Pryda Lintel's major benefits include a once off deflection ...

Enquire Now

Timber Floor and Rafter Trusses by Pryda

Assured performance: Pryda floor and rafter truss systems have been used with outstanding results for over 10 years by designers and builders. Design versatility : The long span capacity up to 8 metres or more ...

Enquire Now

Contact Pryda Australia

By sending this enquiry you will also be informed of other related opportunities.

* First Name

Surname

Phone

* Your Email

State

Message

Be the first to know about new products, services and developments. Send me Infolink's newsletter.

Get new security code

* does not match

Send Enquiry

News sign up

Pryda Australia News

Pryda Australia Introduce the Bond Beam Tie Down Strap (20/08/2009)

The Bond Beam Tie Down strap from Pryda Australia has been designed to assist builders in quickly tying down roof and floor trusses to masonry blocks.

Pryda’s Got Easy Hips (12/08/2009)

The Hip Support Bracket from Pryda helps fabricators and builders to deal with common timber connection issues. This L shaped HSB reduces material consumption and simplifies the installation process.

Designer Software from Pryda for the calculation of accurate and cost effective designs for floor and rafter trusses (15/04/2009)

Designer Solutions Software from Pryda provides designers, builders, specifiers, architects and engineers with an all inclusive, simple-to-use tool for calculating accurate designs.

Pryda Australia offers timber jointing products

Timber jointing products from Pryda Australia (22/12/2008)

Pryda Australia has developed tools to enhance the quality of timber jointing products. Timber jointing products are used for many applications in both domestic and commercial buildings.

Plated timber beams available from Pryda Australia (18/12/2008)

Plated timber beams are available from Pryda Australia. The process of producing plated timber is commonly referred to as timber jointing.

Pryda’s Turb-O-Web system saves fabricators time and money (11/08/2008)

The Tub-O-Web system, available from Pryda, is an innovative system in manufacturing roof trusses, saving fabricators time, money, resources and resulting in a better quality product.

Pryda Lintel steel angle available from Pryda Australia (6/08/2008)

Pryda Australia has developed Pryda Lintel, a lightweight steel angle that replaces traditional timber and composite window heads.

Flush packed roof trusses fitted with Pryda Web Stiffeners

Pryda Web Stiffeners help overcome fabricators’ dilemma (23/07/2008)

Pryda Web Stiffener is a galvanised steel component for stiffening timber truss webs against lateral buckling. They can be fitted in the truss plant and thereby, avoid the need for onsite applied web ties. The clever design ...

Engineering Pressing, Sawing and Jointing Systems from Pryda Australia (31/01/2008)

Pryda Australia also manufactures engineering products related to walls, floors, sawing and timber jointing.

Designing Software and Roof Products from Pryda Australia (30/01/2008)

Pryda Australia have various software programs for designers for estimation and designing.

Connectors and Fasteners from Pryda Australia (29/01/2008)

Pryda Australia which is a division on ITW Australia is the manufacturer of engineered products and some specialty items like connectors and fasteners.

‘Standard’ post anchor (20/08/2004)

Pryda Australia has released a new range of lower cost ‘standard’ post anchors that still comply with the company’s strict design criteria for high quality products.

Floor system choice (8/07/2003)

Pryda is said to have become the only company to offer a choice of floor truss systems to the Australia and New Zealand building markets with the release of its new steel web system, Pryda Span.

Engineered connectors (9/04/2003)

Pryda has developed engineered connectors for a variety of applications and data on the technical capability of its range readily available to architects, designers and engineers.

Tie-downs (8/04/2003)

In severe windstorms sheet metal roofs can become deadly missiles even in areas of Australia not affected by cyclones. This is because the wind uplift forces are greater than the weight of the roof and the “tie-down” fixings ...

Truss cut saw (9/01/2003)

Pryda has become the Australian distributor for the UK-developed EMS truss cut saw, a single-bladed pop up saw that is fully computerised and downloads information about the cutting requirements for any project direct from ...

Pryda donates frame model (10/12/2002)

Pryda Australia and Wines Roof Truss and Wall Company have donated a frame and display model to Apprenticeships Victoria Croydon campus to help with the training of apprentice carpenters.

RSS Feed

News sign up |

Collapse Pryda Australia News

Sections

Infolink Newsletter

Be the first to know about new products, services and developments. Sign up for Infolink Product News.