Ezystrut supplies a wide range of cable tray products. ET, ET3 and ET5 Cable Trays are the top of the line. Designed to remain visually attractive for occasions where they may remain exposed after the completion of a project, they have a high load capacity as well as a side wall.

They are also safe to install. They bear no sharp edges that could damage cables or other equipment. They are recommended for general purpose installations and are made from durable steel and finished to pre-galvanised standard AS1397 or hot dip galvanised to AS4680.

Features

ET cable trays:
  • Side rail height = 45mm
  • Supports up to 27kg of cables over a 3m span
  • Alternatively supports up to 105kg over a 1.5m span
The ET3:
  • Side rail height = 47mm
  • Supports 29kg over a 3m span
  • Alternatively supports 116kg over a 1.5m span
The ET5:
  • Rivals the capabilities of cable ladder products
  • Supports 227kg of cables over 3m
  • Alternatively supports 60kg over 1.5m
  • Side rail height = 85mm
These cable tray products are easy to work with and can be installed on site. Because EzyTray lengths can be cut and bent to the required shape and supported with different accessories it is not necessary to purchase fittings like bends, tees, crosses or risers.


07.06.2012