EnduroShield for glass - a clear choice for architects on Chatswood CTI
EnduroShield for glass
EnduroShield for glass permanent protective coating has been applied to all of the overhead glass awnings on the NSW State Government’s current Chatswood Transport Interchange Project at Chatswood railway station.
Specified by award-winning architects and urban designers, Cox Richardson/Design, the coating was professionally applied by Origen Australia . To be completed over a period of 18 months, the coating is applied immediately following the installation of each of the awnings.
The glazed roof structures will extend the retail capacity whilst providing a visible and attractive linkage to either side of the station. The awnings will provide natural light and protection to the commuter concourses and newly created retail space whilst assisting in enhancing existing connections to buildings surrounding the interchange.
With extensive glass awnings totalling over 2000sqm, EnduroShield for glass was specified on the $360 million project because of its permanence and easy-clean properties.
Varying in size from 32sqm to 500sqm the glass awnings are constantly exposed to weathering, pollution and break dust from the train system below.
EnduroShield for glass protects the glazed surfaces by sealing the porosity of the glass, protecting against staining, etching and the general deterioration caused by weather and pollution.
The life of the awnings will be extended whilst the environmental impact is minimised with reduction in both water and chemical usage.
EnduroShield is suitable for all commercial glass surfaces, particularly awnings and other large facades which are difficult and expensive to maintain.
The coating will reduce maintenance costs by minimising time spent cleaning as well as extending the period between cleans. Overall, the appearance of the interchange will benefit, with the feature glass awnings remaining cleaner for longer.
EnduroShield is available for all glass, stainless steel, tile, grout and ceramic surfaces. The permanent protective coating uses advanced nanotechnology and is only two molecules thick.
The invisible coating seals the surface causing contaminants to remain on top of the coating which makes them easy to remove and prevents corrosion.
EnduroShield can be applied in factory to the surface before installation or in situ by professional applicators. The product is a clear liquid that is sprayed on and polished into the surface, creating a permanent bond.
16-Apr-2008