If a wall lining that provides the look of natural timber without the hassle of installation is needed, then easyclear is the answer.
easyclear, from Easycraft , is manufactured from 9mm Hoop Pine Plywood and is available in 2400mm x 1200mm and 2700mm x 1200mm wide sheets.
Available in Beaded or VJ profiles and featuring the easyjoin tongue and groove system, the easyclear can be installed quicker and easier than conventional timber boards.
The joint disappears into the face pattern and there would be no mismatched sheet edges or gaps.
The easyclear can be used internally for wall or exposed ceiling linings, or in semi-external applications such as verandas, portico ceilings or even as an under eave lining.
The easyclear cannot be used where it will be fully exposed to the weather. As a natural timber product the easyclear sheets should be sealed within 5 days of installation.
Manufactured from 9mm Plywood C+ Hoop Pine Face, the easyclear is fully termite treated for use throughout Australia. As a natural timber, the easyclear is ready for staining or varnishing once installed.
The easyclear can also be manufactured as a pre-finished board with a 30% clear gloss coating applied in the factory at the time of manufacture.
The easyclear is manufactured from raw materials sourced from AFS Certified Forests to AS4708 and complies with E0 Formaldehyde levels.