Colourmax Tactile Indicators from DTAC are made in Australia from extruded, solid 316 marine grade stainless steel. Colourmax Tactile Indicators are manufactured using a CNC turning method and completed to a mill finish.
Colourmax Tactile Indicators Standards
Colourmax Tactile Indicators and installation must comply with:
- AS/NZS 1428.4 2002
- BCA Section D clause 3.8
- HB 197 (1999)
Colourmax Tactile Indicators Dimensions
- At base: 34.5mm +/-0.5mm Diameter
- At top: 24.5mm +/-0.5 Diameter
- Exposed height: 4.5mm +/-0.5mm
- Shaft: M6mm x 8/16/20mm shaft/s depending on substrate/surface
(NOTE: Shaft is important for anchoring, smaller dimensions must be rejected)