Slideform formwork systems from Conform
Conform specialises in offering concrete formwork systems. Conform offers wide range of formwork products to contractors and individuals. The products offered by Conform include slideform, plasticform and machineries.
Slideform from Conform is a slab on ground edge formwork system. The slideform concrete formwork from Conform gives accurate slab edges and rebate depths to entire range of slabs. The slideform system is not damaged by water, weather and nailing. Slideform system is easy to use and stays straight for long time. It can be transported to the site easily and can be stored. Slideform systems are ideal for forming rebated and non-rebated monolithic slabs.
Monolithic pouring methods were followed by most of the contractors and builders earlier. Today, slideform combines the problems associated with monolithic pouring and provides monolithic slab without hassles. The time taken in making the monolithic slabs varies based on the slab system chosen. It also helps in saving the poured footings. Slideform systems from Conform are resistant to termite and acts as a barrier system.
Slideform can be prepared in a simple method. The beams required must be prepared depending on the type of system. All under slab plastics, sanding up, trench mesh and reinforcing mesh must be completed. The slideform channel is then aligned to the string lines with locking plates. The height is set and clamped onto the pegs with help of tie hooks and nuts.
20-Jun-2008