The PV3L Twin heating cable, available from Comfort Heat Australia , is suitable for small areas where the heating is required to be installed in the tile adhesive. The PV3L Twin cable has a fast response time and reaches set temperatures in one or two hours.
As the PV3L Twin is a return cable system, installation is made simple as the mat can be rolled out with no return cable. The PV3L Twin cable is suitable for small bathrooms.
The PV3L Twin cable has a heat output of 160W per m² and is available in 300mm wide fabricated mats, with pre determined length ranging from 3m to 12m. Comfort Heat staff can help in selecting the correct mat for the specific heated area, with a 100mm clearance from walls and fixtures.
The PV3L Twin cable is installed directly to the sub-floor beneath the tiles in the tile adhesive. PV3L mats are attached to the floor with hot glue, nylon anchors and tape. The tile adhesive is laid directly over the heating mat. Due to the thin cable, the Comfort Heat ‘Sensor Tube’ will need to be chased into the floor.