Caterpillar have introduced three D-series mini hydraulic excavators with higher bucket and traction forces. The 307D is a direct replacement for the 307C. The 308D CR, a compact radius machine that works productively in tight spaces, replaces the 308C CR. A new model, the 308D CR SB, combines the compact radius design with a swing boom for even more versatility.
The D-series mini excavators retain the important features of the C-series models while incorporating many improvements that increase productivity and reduce operating costs. The new mini excavators perform better than their predecessors with 22% higher bucket forces and 10% higher stick forces.
Lift capacity has been increased with the addition of a larger counterweight. A 15% increase in traction forces improves dozing and turning performance. Collectively, these enhancements make the D-series models quick, powerful and efficient so work can be completed faster and more economically.
Each machine is powered by a new turbocharged Mitsubishi 4M40 TL engine, rated at 54 net horsepower (40 kilowatts). The engine is reliable, durable, fuel efficient and meets Interim Tier 4 emissions regulations.
A high quality cab helps operators work productively. These improvements, plus a new rubber undercarriage option, standard high-pressure auxiliary hydraulics and standard thumb-ready sticks, make the D-series models ideal for a variety of general construction jobs.
The D-series mini excavators share a common operator’s station with larger Cat excavators. The cab is quiet, roomy and well-ventilated with plenty of legroom. It offers all-around visibility and a clear view to the work area.
An air suspension seat is available for maximum comfort, and easy-to-use joystick controls are integrated with the seat and armrests to reduce fatigue. To improve communication between the operator and the machine, a new colour monitor displays information in text, rather than codes. It can deliver messages in 27 languages to accommodate a diverse workforce.
The 307D, 308D CR and 308D CR SB are designed to do more jobs in more places. All models accommodate a complete range of work tools. A standard combined function high-pressure auxiliary hydraulic circuit and standard thumb-ready sticks ensure the excavators are ready for any job.
A standard Cat Tool Control System lets the operator pre-set flows and pressures for up to 10 work tools using the in-cab monitor. The tools can then be used at the touch of a button, without resetting the hydraulic system.
While a large work tool selection makes these machines perform well at many jobs, their size also contributes to their versatility. The two compact radius models work where full sized units cannot go, and the addition of a swing boom to the 308D CR SB enables it to work more productively alongside buildings, fences and other obstructions.
Many features make the D-series models economical to own and operate. An economy mode reduces fuel consumption in light-duty applications, while maintaining high bucket forces and lift capacity.
A boom and stick regeneration circuit saves energy during boom-down and stick-in operations, increasing efficiency and lowering operating costs. Grease lubricated track offers long wear life at lower total cost. Easy-access service points and extended maintenance intervals increase uptime and drive down operating costs.
For more information about the 307D, 308D CR and 308D CR SB mini hydraulic excavators, customers should contact their local Cat dealer.
Basic specifications for D-series mini hydraulic excavators:
307D
- Engine - MMC 4M40 TL
- Net power - 55.6hp (41.5kW)
- Operating weight - 15,598lb (7 075kg)
- Maximum reach at ground - 21ft 11in. (6 670mm)
- Maximum dig depth - 15ft 1in. (4 600mm)
- Tail swing overhang - 2ft 0in. (605mm)
- Bucket force - 11,061lb-ft (49.2kN)
- Stick force - 8,138lb-ft (36.2kN)
- Max traction force - 12,747lb-ft (56.7kN)
308D CR
- Engine - MMC 4M40 TL
- Net power - 55.6hp (41.5kW)
- Operating weight - 17,306lb (7 850kg)
- Maximum reach at ground - 22ft 0in. (6 710mm)
- Maximum dig depth - 15ft 2in. (4 630mm)
- Tail swing overhang - 5in. (130mm)
- Bucket force - 13,489lb-ft (60kN)
- Stick force - 8,768lb-ft (39kN)
- Max traction force - 14,523lb (64.6kN)
308D CR SB
- Engine - MMC 4M40 TL
- Net power - 55.6hp (41.5kW)
- Operating weight - 18,519 (8 400kg)
- Maximum reach at ground - 24ft 5in. (7 430mm)
- Maximum dig depth - 15ft 6in. (4 730 mm)
- Tail swing overhang - 6in. (150mm)
- Bucket force - 13,489lb-ft (60kN)
- Stick force - 8,768lb-ft (39kN)
- Max traction force - 14,388lb-ft (64kN)