MDF and Particleboard - CUSTOMwood® MDF, COLOURpyne® LPM and PYNEboard by Carter Holt Harvey®

• Precision milled from high-quality MDF (Medium Density Fibreboard)
• Easy to work with – cuts, drills and routs cleanly without splintering or chipping
• Free of knots and grain – making finishing easier and less time-consuming Smooth surface makes it ideal for high gloss paint systems
• Pre-sanded surface – ideal substrate for timber veneers, vinyl, paperand heat transfer foils
• Available with a white melamine impregnated decorative paper surface
• MR (Moisture Resistant) – ideal for cabinetry in wet areas
• Produced in Australia by Carter Holt Harvey
• Ultra low formaldehyde levels (E0) in some sizes
• Manufactured from responsible and sustainably managed plantation timber

• Precision milled in either high-quality MDF or Particleboard
• Easy to work with – cuts and drills cleanly
• Tough, scratch resistant melamine surface – ideal for vertical surfaces
• MR (Moisture Resistant) substrate – ideal for cabinetry in wet areas
• Latest fashion colours and a palette of classic prints to authentic woodgrains
• Velvet eggshell or Décor lightly textured surface finishes
• Produced in Australia by Carter Holt Harvey
• Manufactured from responsible and sustainably managed plantation timber

• Particleboard Precision milled high-quality Particleboard
• Easy to work with – cuts and drills cleanly
• No grain direction – same strength in all directions
• Smooth, pre-sanded – ready for painting or laminating
• Available in standard or MR (Moisture Resistant) grades
• Available with a tough, scratch resistant white melamine surface in eitherVelvet eggshell or Décor lightly textured surface finishes
• Produced in Australia by Carter Holt Harvey
• Manufactured from responsible and sustainably managed plantation timber

• Standard Panels
• Thicknesses: from 3 mm to 32 mm
• MR (Moisture Resistant) Panels 
• Thicknesses: 9 mm, 12 mm, 16 mm, 18 mm, 25 mm, 32 mm
• DIY Planks
• Thicknesses: 3 mm, 6 mm, 9 mm, 12 mm, 16 mm, 18 mm
• Sheet Sizes: 2420 mm x 1215 mm and 3630 mm x 1215 mm or make to order sizes

COLOURpyne
Substrate: MDF or particleboard
Finish: Velvet – a delicate eggshell surface; Décor – a lightly textured, orange peel like surface
Surface Colours: Accent White, Almond Fondant, Almond Sand, Antelope Strata, Anthracite, Antique White, New Antique White, Beech, Black, Bronx Beige, Burma Teak, Café Crumble, Charred Oak, Chintz, Cinnamon Crumble, Classic Beech, Crossfire Maple, Dapple Green Tea, Dapple Moss, Folkstone, Hemp Strata, Jarrah, Lodestone, Macchiato, Mist Grey, Mocha Fineline, Myanmar Teak, Natural Cherry, Natural Oak, Pacific Blue, Planked Pear, Powder Oak, Red Cherry, Restful Elm, Sandstone, Silver Haze, Soft Lemon, Storm Grey, Walnut and Venitzia

• Thicknesses: 16 mm, 18 mm, 25 mm, 32 mm and 33 mm
• Sheet Sizes: 2400 x 1200 mm, 2400 x 1800 mm and 1800 x 3600 mm

PYNEboard
Substrate: Standard particleboard or MR (Moisture Resistant) particleboard
Finish: Velvet – a delicate eggshell surface; Décor – a lightly textured, orange peel like surface
Surface Colour: White

• PYNEboard (Particleboard)
• Thicknesses: 9 mm, 12 mm, 16 mm, 18 mm, 25 mm, 33 mm
• Sheet Sizes: 1800 mm x 600 mm to 1200 mm; 2400 mm x 600 mm to 1800 mm; 2700 mm x 900 mm to 1200 mm; 3600 mm x 600 mm to 1800 mm

• PYNEboard (White)

• Thicknesses: 12 mm, 16 mm, 18 mm, 33 mm
• Sheet Sizes: 2400 mm x 1200 mm to 1800 mm; 3600 mm x 600 mm to 1800 mm