CASE launches two new model wheel loaders

All E series wheel loaders feature four work modes, Maximum Power, Standard Power, Economy Mode and Auto Mode that allow the operator to match power and fuel economy to suit their application.

Auto mode, the ideal compromise between productivity and economy, chooses either maximum power or standard power modes dependent on engine load.

The 521E boasts 101 net kW in maximum power mode, a 23% increase over the 521D it replaces, 93 net kW in standard power mode and 76kW in economy mode.

The 621E delivers 121 net kW in maximum power mode, a 20% increase over the 621D, 109kW in standard power mode and 93kW in economy mode.

Limited slip differentials are standard front and rear to ensure all that additional power is put directly to the ground for increased productivity.

Both new models feature the ideal E series cab. The cab floor area has been enlarged for maximum legroom and comfort.

Floor to ceiling glass provides a direct line of sight to the front tyres and attachments and due to the sloping rear hood, visibility to the rear is also good.

Coupled with this, the easy to read analogue gauges and the contoured right hand console with its low effort, single lever joystick, ensure ease of operation. Noise levels in the region of 70dB (A) further ensure operator comfort.

Ease of maintenance is delivered through one piece electric hood along with fluid sight gauges on all reservoirs. In fact, the only tool required for daily maintenance is a rag to wipe oil from the dipstick.

Grouped remote engine oil, hydraulic oil and coolant drains make routine servicing simple as well. A reversing fan in the Case Mid Mount.

Cooling system means the cooling package can be cleaned from the comfort of the operators cab in around ten seconds. Ride control and auxiliary hydraulics are also standard for increased productivity, convenience and operator safety.