Stylish privacy screens from Aliquantum
Aliquantum has recently introduced its stainless steel framed privacy screens and feature screens to the Australian market. Aliquantum’s timber solutions enhance aesthetic appeal and perform well in the harsh Australian climate.
The privacy screens combine the warmth of timber with the sleek modernity of stainless steel. Whether you are after a matt or a high polish finish, Aliquantum’s privacy screens add a stylish element to your outdoor setting.
Designer, Russell Collier, says “For the paying customer we believe that a timber screen should look from every angle. By tradition, screens are installed with the good side facing outwards and the bad side inwards. It is illogical to us at Aliquantum why the paying customer should be faced with a less aesthetically pleasing view of a product for which considerable funds may have been expended”.
So Aliquantum has designed a range of privacy screens that look the same from either side. Aliquantum’s superior design uses routed timber or laser cut stainless steel housings for the individual slats thus eliminating unsightly fasteners from the face of the privacy screen. Furthermore, the housing system results in a screen that looks exactly the same from either side. Customers can feel assured that they can now enjoy the same quality view as neighbours or passers by.
Aliquantum uses timbers such as Jarrah, Western Red Cedar, Tasmanian Oak or Kapur for the slats and the housing posts while the stainless frames can be fabricated from round tube (32mm, 38mm or 50mm), square tube (50mm only) or flat bar 6mm x 40mm. A range of stainless steel finishes are also available and range from matt (180 grit) to HiPol (800grit).
Aliquantum’s privacy screens can be used for:
- Privacy screens
- Feature screens
- Dividing screens (interior or exterior)
- Fence inserts
- Garden fencing (including gates)
- Fence toppers (increases the height of fences to improve privacy)
- Reception areas
- Function screens
10-Jul-2007